Monitoring and storing data is a necessary need for every factory and business. Using Visual Studio will help us connect to any PLC completely free of charge and easily store data, today thelivingchristmascompany.com will connect to the Inovance H3U/H5U Series PLC.

Today thelivingchristmascompany.com continues to guide you to connect Delta PLC from Visual Studio via Ethernet port communication standard to help bring extremely fast and stable communication speed.

Visual Studio – Inovance H3U/H5U PLC

All Inovance PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this.

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Inovance PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Inovance & Visual Studio C# “Data Logging” appeared first on thelivingchristmascompany.com.

Monitoring and storing data is a necessary need for every factory and business. Using Visual Studio will help us connect to any PLC completely free of charge and easily store data, today thelivingchristmascompany.com will connect to the Allen-Bradley Series PLC.

Today thelivingchristmascompany.com continues to guide you to connect Allen-Bradley PLC from Visual Studio via Ethernet port with Modbus TCP/IP communication standard to help bring extremely fast and stable communication speed.

+ Visual Studio C# & PLC Delta “Data Logging”

======

All Allen-Bradley PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this. (Need supports Modbus-TCP Communication)

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Allen-Bradley PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Allen Bradley & Visual Studio C# “Data Logging” appeared first on thelivingchristmascompany.com.

Monitoring and storing data is a necessary need for every factory and business. Using Visual Studio will help us connect to any PLC completely free of charge and easily store data, today thelivingchristmascompany.com will connect to the Mitsubishi FX5U Series PLC.

Today thelivingchristmascompany.com continues to guide you to connect Delta PLC from Visual Studio via Ethernet port with Modbus TCP/IP communication standard to help bring extremely fast and stable communication speed.

Visual Studio & Mitsubishi FX5U

======

All Mitsubishi PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this.

Using Visual Studio to connect to a PLC has the following advantages:

+ Direct connection, Do not use OPC / MX Component software >>> FREE

+ Connects to all Mitsubishi PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post Mitsubishi FX5U & Visual Studio C# “Data Logging” (Direct Connection) appeared first on thelivingchristmascompany.com.

With this program we can easily control any inverter from Mitsubishi or other brands following the Modbus-RTU standard

Video Tutorial

======

Using Visual Studio to connect to a VFD has the following advantages:

+ Connects to all Mitsubishi (or Delta, Danfoss, Fuij…) VFDs: Just need the inverter to support Modbus-RTU communication standard

+ Easy customization, can store all vfd memory areas.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect, monitor, and store data quickly with just a computer, no PLC needed�saving costs and time for businesses

DELTA MS300 VFD Communication Setting

In addition to the parameters of the inverter installed according to the motor (frequency, voltage, current), we need to set the communication parameters as follows:

+ P00.20 = 1 (Modbus-RTU Control Frequency)

+ P00.21 = 2 (Modbus-RTU Control Motor)

+ P09.00 = 1 (Address Slave = 1)

+ P09.01 = 9.6 (9600bps)

+ P09.02 = 0

+ P09.03 = 1.0 (Time Detect Err = 1.0s)

+ P09.04 = 14 (Modbus-RTU Slection 8bit / stop bit = 1/ Even)

Control Address

>>> Motor Control Address = 2000 (hex)

+ Set Word 2000 = 18 (dec): Forward Run
= 34 (dec): Reverse Run
= 1 (dec): Stop Run

>>> Frequency Address = 2001 (hex)

Monitoring Address

• Output Frequency = 2103 (hex)
• Output Current = 2104 (hex)
• Output Voltage = 2106 (hex)

I will Show Control Panel as well as 100% C# Source Code, but I do not share the Program. You need to learn for yourself to improve your skills:

Front Panel

C# Code (Windows Form)

f you don’t have time and need to program immediately, I will sell it to you for $20 USD via Paypal or USDT (Crypto).

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post Delta MS300 & Visual Studio C# “Modbus RTU” appeared first on thelivingchristmascompany.com.

With this program we can easily control any inverter from Mitsubishi or other brands following the Modbus-RTU communication.

Video Test Program

======

Using Visual Studio to connect to a VFD has the following advantages:

+ Connects to all Mitsubishi (or Delta, Danfoss, Fuij…) VFDs: Just need the inverter to support Modbus-RTU communication standard

+ Easy customization, can store all vfd memory areas.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect, monitor, and store data quickly with just a computer, no PLC needed�saving costs and time for businesses

I will Show Control Panel as well as 100% C# Source Code, but I do not share the Program. You need to learn for yourself to improve your skills:

Panel Design

C# Code

LS iG5A VFD Configuration

Below is the communication parameter table of the LS iG5A

You can configure the following according to the project:

• Drv = 3
• Frq = 7
• I59 = 0
• I60 = 1
• I61 = 3
• I62 = 0
• I65 = 2

LS iG5A Modbus Register Address List

Note: For LS iG5A VFD Series

Control Address = “Register Address – 1”

>>> Motor Control Address = 6 – 1 = 5

• Set Word 5 = 2 >>> Forward Run
  = 4 >>> Reverse Run
  = 0 >>> Motor Stop

>>> Frequency Setting Address = 5 – 1 = 4

>>> Output Current Address = 9 – 1 = 8
Frequency Address = A – 1 = 9
Voltage Address = B – 1 = A (hex)

Note:

If you don’t have time and need to program immediately, I will sell it to you for $20 USD via Paypal or USDT (Crypto).

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post LS iG5A & Visual Studio C# via “Modbus RTU” appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will use Visual Studio C# to monitor and control Autonics TK4S, we can easily store data without spending much money. With 1 COM port we can control up to 32 different stations

Video Trail

======

Computer & Autonics TK4S “Wiring Diagram”

Autonics TK4S “Modbus RTU “Parameters Setting

In order for the Autonics Controller TK4S to communicate with Modbus RTU, we need to set the communication parameters as below:

TK4S >>> Mode >>> PAr.4 (Parameters Group.4)

+ AdrS = 1 (Slave Adress)

+ bPS = 9.6 (Baud Rate)

+ Prty = EvEn (Parity Check)

+ StP = 1 (Stop Bit)

+ rSy.t = 20 (Respense Time)

Front Panel

C# Program Code

If you don’t have time and need to program immediately, I will sell it to you for $20 USD via Paypal or USDT (Crypto).

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post Autonics TK4S & Visual Studio C# “Modbus RTU” appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will use Visual Studio C# to monitor and control Omron E5CC, we can easily store data without spending much money.

Video Demo

======

E5CC & PC “Wiring Diagram”

You connect according to the following diagram, can be up to 32 stations, if the communication distance is long, you need to use a 120Ω terminal resistor.

E5CC Modbus RTU Parameters Setting

Here are the communication parameters to be installed for the E5CC (You can watch the video below for details)

Registers Address Table

+ Temperature Setting Address = 2103 (hex) = 8451 (dec)

+ Temperature Present Address = 2000 (hex) = 8192 (dec)

Software Control Panel

C# Program Code

If you don’t have time and need to program immediately, I will sell it to you for $20 USD via Paypal or USDT (Crypto).

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post Omron E5CC & Visual Studio C# “Modbus RTU” appeared first on thelivingchristmascompany.com.

 With this program we can easily control any inverter from Mitsubishi or other brands following the Modbus-RTU standard.

Video Tutorial

======

Using Visual Studio to connect to a VFD has the following advantages:

+ Connects to all Mitsubishi (or Delta, Danfoss, Fuij…) VFDs: Just need the inverter to support Modbus-RTU communication standard

+ Easy customization, can store all vfd memory areas.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect, monitor, and store data quickly with just a computer, no PLC needed�saving costs and time for businesses

I will Show Control Panel as well as 100% C# Source Code, but I do not share the Program. You need to learn for yourself to improve your skills:

Control Panel [Interface Design]

C# Program

Mitsubishi FR E700 Modbus RTU Parameters Setting

Below are the communication parameters that need to be set up of the FR E700 inverter that can communicate with Modbus RTU:

• Pr117 = 1 (Address Slave Number)
• Pr118 = 3 (9600bps)
• Pr119 = 0 (8bit/Stop:1bit)
• Pr120 = 2 (Parity: Even)
• Pr121 = 9999
• Pr122 = 9999
• Pr123 = 9999
• Pr124 = 1
• Pr340 = 1
• Pr549 = 1
• Pr79 = 2 (Last Setting)

Register for Control Address

Address where holding register data write will be started Starting address = “Starting register address (decimal)-40001”

>>> Register Control Address = 40009 – 40001 = 8

• Set Word 8 = 2 >>> Forward Run
  = 4 >>> Reverse Run
  = 0 >>> Stop

>>> Register Frequency Reference = 40014 – 40001 = 13

Register for Monitoring Address

In the thelivingchristmascompany.com project read 3 consecutive registers including: 40201, 40202, 40203

• Output Frequency = 40201 – 40001 = 200 / Number Registers = 3

======

If you don’t have time and need to program immediately, I will sell it to you for $20 USD via Paypal or USDT (Crypto).

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post Mitsubishi FR-E700 & Visual Studio C# via “Modbus RTU” appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com continues to guide you to connect Delta PLC from Visual Studio via Ethernet port with Modbus TCP/IP communication standard to help bring extremely fast and stable communication speed.

+ Visual Studio C# & PLC Delta “Data Logging”

======

All Delta PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this.

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Delta PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Delta & Visual Studio C# “Data Logging” appeared first on thelivingchristmascompany.com.

• PLC Omron & Visual Studio “Data Logging”

Today thelivingchristmascompany.com can also connect to Delta PLC through the RS485 port that most Delta PLCs are integrated with:

+ Delta DVP All Series

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Delta PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Delta & Visual Studio C# “Data Logging via RS485” appeared first on thelivingchristmascompany.com.