+ XGT: XGK CPUU, XGK CPUH, XGK CPUA, XGK CPUS, XGK CPUE, XGI-Series, XGR-Series.
+ XGB, XGT Series: XBM, XBC, XEC.

• Unlock PLC / HMI Software List

In some cases, after downloading the Project, when opening the software, it will ask for the program password set by the programmer, that’s why today thelivingchristmascompany.com introduces to you the service of unlocking all Projects using LS’s XG5000 programming software.

Detailed Information

+ Ready to unlock 24/7, password will be available immediately after you submit the program

+ Read passwords in all modes of all XG5000 Project Files – unlimited character.

+ I will open the program and send you the images, then you will pay and receive the password.

Order Details

+ Read PLC LS XG5000 “Project Password”: 30$ USD / Project

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (Binance Smart Chain BEP20): 0x07b8b90009c1939a795539eb490ae5128191395f

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post [Unlock] XG5000 “Project Password” PLC LS appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will guide you to download and install it as quickly as possible. The software is uploaded to GoogleDrive so it will help you easily download it and ensure it is Virus-free. In particular, the software is already Active, you just need to download and use it without installing.

Setup Tutorial

+ Step 1: Download and extract the software with password thelivingchristmascompany.com

+ Step 2: Open ModScan64 software

+ Step 3: Enjoy

Link Download Software

Download with GoogleDrive

>>> Download ModbusScan Software Free

Password Extract: thelivingchristmascompany.com

If you find the article useful, please comment and share the article with the community. Subscribe to Youtube channel and Website thelivingchristmascompany.com to read new articles

Thanks and Best regards!

The post [Download] ModbusScan Ver.2 (GoogleDrive Link) appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will guide you how to use PLC CJ1M (CJ2M + similar MD211 Module) to generate pulses to control Step motors.

Omron CJ1M CJ2M & Step Driver “Wiring Diagram”

• Depending on the type of Step Driver, we can control it with 5V or 24V, if controlled by 5V, we need a resistor R=2k2 (Ohm) to reduce the voltage.
• DM542 Driver supports control from 5 to 24V

PLC CJ1M CJ2M “Pulse Train Output” Configuration

PLC Omron CJ1M supports 2-axis / CJ2M supports 4-axis control pulse generation, thelivingchristmascompany.com using “Pulse Output 0”

OMRON CJ1M “Pulse Output” Program

+ Step ON/OFF & Data Configuration

+ Axis Possition Control

Video Tutorial

======

Reference Software:

+ Omron CX-Programmer Software Download

If in the process of using Omron CJ1M, CJ2M to control Stepping Motor, you have difficulties or need any support, please comment below the article, thelivingchristmascompany.com will reply to you as soon as I read the comments.

Thanks and Best Regards!

The post Omron CJ1M CJ2M “Stepping Motor” Control Tutorial appeared first on thelivingchristmascompany.com.

Monitoring and storing data is a necessary need for every factory and business. Using Visual Studio will help us connect to any PLC completely free of charge and easily store data, today thelivingchristmascompany.com will connect to the Inovance H3U/H5U Series PLC.

Today thelivingchristmascompany.com continues to guide you to connect Delta PLC from Visual Studio via Ethernet port communication standard to help bring extremely fast and stable communication speed.

Visual Studio – Inovance H3U/H5U PLC

All Inovance PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this.

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Inovance PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Inovance & Visual Studio C# “Data Logging” appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will guide you to connect HMI Kinco MT4414TE to PLC Delta DVP12SE via Ethernet port where both are integrated.

PLC Delta “Ethernet Port. Parameters Setting”

We need to set the IP address for PLC and Port. I recommend keeping it as default

Kinco HMI to PLC Delta “Ethernet Configuration”

We set the IP address and Port. of the HMI according to what has been installed for the PLC

Video Tutorial

======

References

>>> Download PLC Delta DVP-Series Programming Software

>>> Download HMI Kinco Programming Software

If in the process of using Kinco HMI to connect to Delta PLC via Ethernet communication “Modbus TCP/IP” and you need any support, please comment below the article, thelivingchristmascompany.com will reply to you as soon as possible.

Thanks and Best Regards!

The post Kinco HMI & Delta PLC “Ethernet Communication” Tutorial appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will guide you through configuring the Delta DOP-107EV HMI connection to the Delta DVP12SE PLC via Ethernet communication in a simple and easy way.

PLC Delta Ethernet Communication Setting

We need to set IP address and Port. (should be default) for Delta PLC

Delta HMI Ethernet Configuration

Set the PLC address for the HMI to know (pay attention to setting the HMI’s IP address in the same range but different from the PLC address)

Project Video Tutorial

======

Software Reference

+ Delta DVP-14SS2 Programming Software Download

+ Download Delta DOP-107EV HMI Software

Please comment and share the article with the community if you find it interesting and useful, subscribe to the Youtube channel and Website to read new articles from thelivingchristmascompany.com

Thanks and Best Regards!

The post Delta HMI & PLC Delta DVP12SE “Ethernet Communication” Tutorial appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com continues to guide you how to use Proface HMI (GP4402WW) to connect to Delta DVP12SE PLC (Or any PLC with Ethernet port or Ethernet Module) simply and easily.

PLC Delta “Ethernet Communication Setting”

Below are the parameters that need to be configured for Ethernet for Delta PLC

Proface HMI Ethernet Communication Setting

You need to set the communication parameters according to the parameters installed in the PLC.

Delta Modbus RTU/TCP Address Mapping

Video Tutorial

======

If you have any questions, please comment below the article, thelivingchristmascompany.com will answer you as soon as I read the your comments.

Thanks and Best Regards!

The post Proface HMI & PLC Delta “Ethernet Connection” Tutorial appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com will guide you to connect Weintek HMI (Model MT8071iE) to Delta DVP12SE PLC via Ethernet communication (Modbus TCP/IP protocol).

PLC Delta “Ethernet Communication Setting”

Below are the parameters that need to be configured for Ethernet for Delta PLC

Weintek HMI to PLC Delta “Ethernet Configuration”

We configure the PLC’s IP address and Port for the HMI to know

I/O Device Address

Video Tutorial

======

References

+ Download PLC Delta Programming Software

+ Download HMI Weintek Software

If you have any questions, please comment below the article, thelivingchristmascompany.com will answer you as soon as possible.

Thanks and Best Regards!

The post Weintek HMI & PLC Delta “Ethernet Communication” Tutorial appeared first on thelivingchristmascompany.com.

Today thelivingchristmascompany.com continues to guide you to connect Delta PLC from Visual Studio via Ethernet port with Modbus TCP/IP communication standard to help bring extremely fast and stable communication speed.

+ Visual Studio C# & PLC Delta “Data Logging”

======

All Delta PLCs have built-in Ethernet ports or Ethernet expansion modules that we can connect to this.

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Delta PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Delta & Visual Studio C# “Data Logging” appeared first on thelivingchristmascompany.com.

• PLC Omron & Visual Studio “Data Logging”

Today thelivingchristmascompany.com can also connect to Delta PLC through the RS485 port that most Delta PLCs are integrated with:

+ Delta DVP All Series

Using Visual Studio to connect to a PLC has the following advantages:

+ Connects to all Delta PLCs: Connection through built-in PLC communication ports such as Ethernet, RS232, RS485 or Expansion modules

+ Easy customization, can store all PLC memory areas, can store data when PLC Trigger or Store according to fixed time cycles.

+ The software is completely free, can package Windows applications and use an unlimited number of computers

+ Connect multiple PLCs with just one software, suitable for SCADA systems for factory management

I will make step-by-step connection tutorial articles, not share this project. If you need it, you will have to pay a small fee:

+ Make the program according to your requirements and package it into an Exe file that can be used on any computer: 30$

+ Get “Full Source Code” and user manual as well as lifetime support: 120$

Payment methods

+ Paypal

• Payment via email address: thelivingchristmascompany.com@gmail.com

+ Crypto

• USDT Wallet (TRC20): TBxu9tjKKZvoTkPNurYk8FYpQfENHNUnRM

You will receive the software via Email or any other method you want!

Please contact: thelivingchristmascompany.com@gmail.com for more details and software purchase.

Thanks and Best Regards!

The post PLC Delta & Visual Studio C# “Data Logging via RS485” appeared first on thelivingchristmascompany.com.