Hello friends!
HMI Samkoon and Inovance inverter are two devices originating from China, cheap price but good quality. Therefore, they are used quite a lot in simple machines, especially machines originating from China.
Today thelivingchristmascompany.com will guide you to connect them together based on Modbus-RTU protocol which both are supported.
Samkoon HMI & Inovance MD200 “Wiring Diagram”
Below is the RS485 connection diagram between the Samkoon HMI and the Inovance MD200 inverter
Inovance MD200 “Modbus RTU” Configuration
To be able to control and monitor the Inovance MD200 inverter using the Modbus-RTU protocol, we need to set the following communication parameters:
Inovance MD200 Modbus Registers Address
+ VFD Control Address = 2000 (hex) = 8192 (dec)
- Set Word 8192 = 1 >>> Forward Run
- Set Word 8192 = 2 >>> Reverse Run
- Set Word 8192 = 6 >>> Stop
+ Set Frequency Address = 1000 (hex) = 4096 (dec)
>>> Frequency Reference = (0 to 10000 dec) ~ (0 to VFD Max Frequency)
+ Output Frequency Address = 1001 (hex) = 4097 (dec)
+ Output Voltage Address = 1003 (hex) = 4099 (dec)
+ Output Current Address = 1004 (hex) = 4100 (dec)
HMI Samkoon Modbus Parameters Setting
As we have set the Modbus communication parameters for the Inovance MD200 inverter, the same is set up for the Kinco HMI.
HMI Programming
+ Control Panel
+ Frequency Setting
+ Forward Run
+ Reverse Run
+ Stop Command
+ Read Output Frequency
+ Read Output Current
+ Read Output Voltage
Detailed Video Tutorial
======
References
+ HMI Samkoon SK-070HS Software Download
Password Extract: thelivingchristmascompany.com
Please comment and share the article to the community if you find it interesting and useful. Subscribe to Youtube channel and Website to read new articles of thelivingchristmascompany.com
Thanks and Best Regards!
