- Click here to see the “List of Omron Software”
- CX-One V4.4 “.ISO File” (The most stable installation, no Windows conflicts)
- New Version: Download CX-One V4.6 / CX-Programmer V9.75
CX-One V4.51 is OMRON’s latest software as of the time thelivingchristmascompany.com wrote this article, it is integrated with the following software:
+ CX Programmer V9.73 (Supports the latest PLC Models: CP2E…)
+ CX Server V5.2.4
+ CX Process Tool V5.2.4
+ CX Motion V2.3.9
+ CX Position V2.5.2
+ CX Simulator V2.0.1
+ CX Integrator V2.6.7
+ CX Designer V3.7.3
+ CX Drive V3.0.0
+ CX-Integrator V2.6.7
+ CX Protocol V2.1.0
Operating systems that support installation of CX One V4.51
+ Microsoft Windows Vitsa
+ Microsoft Windows 7 (32/64bit)
+ Microsoft Windows 8/8.1 (32/64bit)
+ Microsoft Windows 10 (32/64bit)
+ Microsoft Windows Server
Software Download Link
1. Download via GoogleDrive 
2. Backup Link GoogleDrive
Password Extract: thelivingchristmascompany.com
=====
If the download link is broken or there is any problem during the installation process, please comment below the article, thelivingchristmascompany.com will check as soon as you read it.
Please share the article if you found it helpful. Thanks!
O link do Google Drive estava quebrado
Sorry sir! Can you cm english?
I can´t downloaded beacause the google drive is empty.
i check link still OK
can you help me , after i install appear ” error3 cx server dveice driver ( generic Fins Ethernet) failed to install .
thx for your help
Install a standalone CX-Server in the CX-Sever directory
the link of Google Drive was broken.
It says that it already had many downloads and it is impossible to download it again.
You need to wait 24 hours to download
after i install a stand alone appear “Failed to unzip ethernet FINS consfiguration. Aborting
Could you suggest this problem, thank alot for your help
Can you open the CX-Programmer?
cx prog. cannot open and appear ” the code excecution can’t proceed because OSLisence.dll wasn’t found, reinstalling the prog. may fix this problem”
And i already reinstall and not success.
Thanks alot for your attention
Can you reinstall the operating system?
Not working to my device
what happen sir
thank you very much, sir.
I need a bay omron plc software WS02-CXPC1-E-V .
please send the price.
OK i will check
password for .rar file???
password: thelivingchristmascompany.com
Sorry sir, i can’t use password
need using winrar software
Hello, I am unable to download the link. He tells me that there has been too much consultation or downloading
thank you
waiting 24h sir
Google drive link is empty
i check link still OK
Try to download got this message:Sorry, you can’t view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can’t access a file after 24 hours, contact your domain administrator.
waiting 24h and back to download sir
what version needed for CX-programmer V6.0 files. cant open my files on V6.1
6.1 ok sir
Hi, the download link is not working. Can anyone help?
Hello sir, I check link still OK
Sir. I can’t download due to google drive empty file
I checked link still OK
Sir. I can’t download as access denied, please give me permission.
Now Link fixed
link asks access permit
Now Link fixed
can’t download, link error
link checked OK sir
Hallo
Only 580Mb can be downloaded then transfer failed..
The problem comes from your Internet connection
Plc i working on is omron cpm1a-40, connect to pc using usb to rs232, On first run, everything is ok, but once i disconnect cable and reconnect back to pc, cx programmer will displayed error “selected port used by another application”. I tried everythings, including work online without connect the cable.
The only solution i found is restart pc while the cable is in the port i setup with,
Is there any simple solution without restart?i dont have problem like this with syswin before…help
No way sir, your PLC very old 😀
I am almost finished installing but it says Error 1706. No valid source could be found for product CX-Server RT. and it keeps popping everytime
I need you need reinstall your OS
where the lincense code please?
When you unzip it will have it
I have already unzip folder but in folder i get lincese
contact me via email sir
why doesn’t download software
error showing….
Sorry, you can’t view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file that you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can’t access a file after 24 hours, contact your domain administrator.
need waiting 24h sir
It says that it already had many downloads and it is impossible to download it again.
I ve already waited 24 hours, but I still can[t download it.
is there another link
ok i will update second link
Plz give winrar Password
password: thelivingchristmascompany.com
Kata sandi nya tidak bisa, apakah benar kata sandinya atau ada yang lain?
Huruf kecil semua
thelivingchristmascompany.com
please comment via english
can’t download get message… Sorry, you can’t view or download this file at this time.
what happen for you ?
Hi, this version include CX- Thermo?
It is possible run this version with windows XP?
Windows 10 better
hi. pls help cannot finish the installation.
the message “The file ‘E:\cx-server\CX-Server RT.msi’ is not a valid installation package for the product CX-Server RT. Try to find the installation package ‘CX-Server RT.msi’ in a folder from which you can install CX-Server RT.”
thanks.
You need to install CX-Server separately. it’s in the CX-One folder
It says that it already had many downloads and it is impossible to download it again
is there another link?
download via backup link sir
Back up also , it already had many downloads and it is impossible to download it again.
i think your internet have issue, i check link sill OK
Hi, when i try to open cx programmer it gives an error about cx server like “Cc server couldn’t reset”. Can you help me?
Please go to the CX-One installation directory and install the standalone CX-Sever
Are you there? Please help me
contact me via email sir
the code execution cannot proceed because Os licence .dll was not found .
what is the problem ? thats error after i opening the RX-programmer
Did you install any old version of CX-One before?
Does it support CJ2M CPU33 plc?
yes sir
How to get liscense number sir, thank you
Key is in the extracted file
I can’t unzip the file. Can you help me? It says that the password isn’t correct.
need using winrar software
I have the problem when I click the ISO file it said missing key argument given
sent to me image via email
good version
ok sir
i have problem during installation setup, it says “Microsoft Internet Explorer 5.0 or later is required…” how to fix it?? thanks
Install Microsoft Internet Explorer
I messed up and pick register online and now I don’t have the product key for it.
contact me via email, no need register online
Can’t find key install please help
contact me via email
Tôi không tìm thấy key cài đặt trong file giải nén. Vui lòng cung cấp giúp tôi key để cài đặt. Xin cảm ơn
please comment via english sir
Can’t find key install please help
contatc me via email
i need a license key…please email me ( rafiqzulkifli13501@gmail.com )
license on this post
on which post
i need a license key…please email me
contact me via email
Hello Sir, I Need a License key to activated this product, also i attach my email address at the form, Thanks.
contact me via email
Im not able to download the software . when i try , one window appear and it asked me that : Autorization is required.
Request acces ( i made the request but still not able)
Can some body help me what mean that? and how to fixe it?
you can using backup link ? i will update now
me gustaría la clave
please comment via english
i need a license key…please email me
contact me via email: thelivingchristmascompany.com@gmail.com
링크가 할달량을 초과했다고 뜹니다.
please comment via english
Hi sir, the link is broken.
i check link still Ok sir
ขอรหัสครับ
please comment via english sir
Hi
Good Morning Sir
The file is successfully downloaded and unzipped. Now installing but it is asking the License key.
Can you plz share.
contact me via email
why i can’t download it
(it show the file is damaged or password incorrect)
contact me via email
link is broken
I check link still OK
Please can you share the license key
contact me via email
electricity
hello can you please do a guide for controlling solar inverters using omron plc, thank you
what model inverter sir
i can’t connect with the plc CP1L. I try to connect directly with ethernet conection but the program don’t find any plc.
I check my wire and my internet configuration and all its ok.
you mean CP1L-E Version ?
HELLO, I WANT TO DOWNLOAD VERSION 9.7, BUT IT SHOWS VERSION 4.51.. WHY IT IS SO??
ALSO I NEED THE KEY FOR IT.
contact me via email sir
what is the password
i use thelivingchristmascompany.com , but it does not work.
please using winrar software
worked, brilliant, thanks a lot you are a star. (note I had to uninstall all the expired Omron Trial version components I was running on my laptop)
thanks sir
hi sir i need license key product
contact me via email sir
cant install its requird licance
contact me via email
lesensinya berpa ya
please comment via english
When I run the program the text appears “Could not initialise CX-Server” how do i solve it?
using CX-Remover first
hello sir, i can’t use the password, whats wrong?what correct the password?
password: thelivingchristmascompany.com
hello sir, i can’t use the password, whats wrong?what correct the password? please answer me
password: thelivingchristmascompany.com